Perform Operations Using DSP Processor

  This experiment was demonstrated by our seniors who explained it really well and made sure that we got our doubts cleared about the experiment. The DSP Processor used was the Texas Instruments TMS320C5505 DSP processor. The DSP processor was programmed using Code Composer Studio (CCS).

 We learnt General instruction format in asm ..For e.g("OPERATION REGISTER,#IMMEDIATE DATA");. Addition is performed as asm("ADD XAR1,#0X08");

We performed basic arithmatic and logical operation such as ADD, SUBTRACT , MULTIPLY, AND ,NOT , LSL using DSP Processor.

The results were later verified that were stored in registers before and after the execution of that particular operation.

https://drive.google.com/open?id=0B2dvoOHjY9tfLUF2UVNtSDIyMHM